Hanger type Shot Blasting Machine is the most flexible machine. These machines are split into the Batch type Machines, in that one batch of parts moves in, starts rotating, gets blasted and moves out, and Continuous type Machines where the machines are equipped with a monorail system that moves the parts continuously through the shot blasting machine. Where component will be hanged and can be rotated, the Hanger Type Machine is advised. In this machine hanger are mounted on the doors of the machine. For the blasting operation the door of the machine is opened and components are loaded on to the hanger. Then the door is closed and the blast wheel unit is operated. After starting the blasting program, the machines door would be automatically closed and electro-pneumatically locked.REQUEST A QUOTE
As the work pieces rotate, these would be blasted at three different blasting stations as per the pre-set blasting times. The blasting abrasive would be continuously cleaned & reused. An abrasive metering device feeds the cleaned abrasive from the abrasive storage. Upon the completion of blasting cycle, the turbines would come to a complete stop, the machine door opens automatically and the suspended work pieces return to their initial stage. The fan unit creates the partial vacuum necessary to maintain dust-free operation and extracted air would be cleaned in a special filter unit of the shot blasting machine.